Data Center
Concrete Floors
Anti-static, dust-free, ISO 5 cleanroom certified. Built during placement, not bolted on after.
Why Data Centers Choose Concria
ESD Compliance
ASTM F150 / SFS EN 61340-5-1 certified. Permanent static dissipative function built into the slab — not a coating that wears off.
Dust-Free Guarantee
No particle shedding, no coatings to degrade, no seams to trap contaminants. The floor itself is the finished surface.
ISO 5 Cleanroom Certified
Meets ISO 14644-1 Class 5 cleanroom requirements. Validated for mission-critical environments.
No Rebar Needed
Optimal Slab doubles surface durability, allowing thinner slabs without rebar. Faster construction, lower material costs.
80% Faster Installation
Entire floor system applied during concrete placement. No waiting for cure, no return trips for coatings.
50% Lower CO₂ Footprint
Fewer materials, fewer site visits, Type 1L (CEM III) low-carbon cement compatible. Supports sustainability targets.
No Epoxy, No Coatings
Single monolithic concrete surface. Nothing to peel, delaminate, or recoat. Ever.
Joint-Free Design
Minimizes joints and seams where dust and contaminants accumulate. Cleaner environment, easier maintenance.
Robotic Scrubber Compatible
Smooth, consistent surface is ideal for automated cleaning equipment and robotic floor scrubbers.
The Problem with Epoxy in Data Centers
Epoxy-coated floors are the legacy standard in data centers. But they come with a critical flaw: they wear out.
Every 3–5 years, epoxy coatings need to be stripped and reapplied. During degradation, epoxy generates particles — the very contaminants data centers are designed to eliminate. Recoating introduces VOCs and requires facility downtime.
Concria Optimal Slab isn't a coating — it's the floor itself. There's nothing to wear off, nothing to recoat, and nothing to shed particles. The ESD properties, dust-free performance, and cleanroom certification are permanent.
Flooring Durability Comparison
How Concria compares to conventional data center flooring over the long term.
Concria Optimal Slab
- ✓ One-time installation
- ✓ Polish-only maintenance
- ✓ Zero facility downtime
- ✓ 50+ year lifespan
Epoxy Coating
- ✗ Recoat every 3–5 years
- ✗ Strip + reapply labor
- ✗ Facility downtime required
- ✗ Particle shedding during wear
VCT (Vinyl Tile)
- ✗ Replace every 5–7 years
- ✗ Regular waxing & buffing
- ✗ Seams trap contaminants
- ✗ Not cleanroom rated
Sustainability Built In
Data center operators face increasing pressure to meet sustainability targets. Concria floors directly support these goals:
- ✓ 50% lower CO₂ than traditional flooring systems — fewer materials, fewer site visits, less waste
- ✓ Type 1L (CEM III) compatible — works with low-carbon cements where traditional products fail
- ✓ BREEAM (LEED Platinum equivalent) certified projects — used in BREEAM Outstanding-rated distribution centers in Europe
- ✓ No VOCs — zero volatile organic compounds during or after installation
- ✓ 50+ year lifespan — eliminates repeated material consumption from recoating cycles
ESD Certified
ASTM F150 / SFS EN 61340-5-1
Permanent static dissipative function.
ISO 5
Cleanroom Certified
ISO 14644-1 Class 5 validated.
FDCA
Industry Member
Finnish Data Center Association.
40+ Countries
Global Track Record
Proven at scale across Europe, Asia, and North America.
Ready to Spec Your Data Center Floor?
Download the Optimal Slab technical data sheet or talk to a specialist about ESD requirements, cleanroom certification, and installation planning.